Emerson AMPGARD RVSS, Instruction Booklet

Page: 52 / 169

52 EATON
www.eaton.com
Instruction Booklet IB020003EN
Effective January 2021
AMPGARD RVSS
Reduced Voltage Soft-Starter
User Manual
9.2.3.5 O screen
For more information, see
MUI Monitoring
.
9.2.3.6 PRG screen
For more information, see MUI Monitoring .
9.3 inControl installation
To use the inControl API, the application must be installed on a local
laptop meeting the following constraints:
System Requirements
The following items are the minimum system requirements for
installing Power Xpert inControl:
•
500 MB minimum hard drive space (for 32 bit and 64 bit)
•
Operating System Requirements: Must operate on one of the following
•
Windows 7 (x32/x64)
•
Windows 8 (x32/x64)
•
Recommended 512 MB RAM memory or greater
•
1024 x 786 pixel resolution display or greater
•
Open PC interface for communication with the device (e.g. USB, Ethernet, RS-485)
Once the inControl installation is complete, communications
between the application and the BCM must be established. When
that is done, the installed parameters setup can be downloaded
from the BCM for review and modification if necessary.
9.3.1 inControl system overview
Power Xpert inControl device configuration and control software
is a FDT/DTM based software tool used for configuration of
networked systems. This tool has been developed to provide a
processor-generic, simple interface for configuration, monitoring,
troubleshooting, firmware gradation, and logic editing functionality
using communication protocols.
The software consists of two major parts—the exterior
Field Device
Tool (FDT) software, which is also known as the “frame application,”
and the interior Device-Type Managers (DTM) . See Figure 55 .
The interior DTM portion is further classified into two categories:
Device DTMs which connect to the field devices configuration
components, and Communications DTMs (gateway DTMs included
for simplicity), which connect to the communications components of
the device.
Figure 55. Information flow diagram and FDT/DTM layout.
9.3.2 inControl application installation
Download the One Installer package from the Eaton website (see
Table 42 ). Double-click the installation package file (One Installer.exe)
to initiate the installation. The Welcome screen will appear.
Figure 56. inControl One Installer welcome screen.
The Power Xpert inControl framework along with Device and
Communication DTMs are available via a CD-ROM shipped with
the product or on our website www.eaton.com/ software. For a list
of reference documents and their links, see Table 15 . For a list of
available software packages and their links, see Table 42 .
To install the Power Xpert inControl configuration program and
associated Device-Type Managers, click "Next." The License
Agreement screen will appear ( Figure 57 ). Read through License
agreement and upon completion, accept the terms and click “Next”.
“Back” will bring you back to the previous window. “Cancel” will
close the installation.
Figure 57. inControl license agreement screen.