Emerson 475 User Manual Download Page 85

Page: 85 / 114

A-5

ORDER INFORMATION

(1) Base Model 475 includes Field Communicator unit with color LCD display, System Card,

Leadset with connectors, Carrying Case, Getting Started Guide, 475 Resource CD, stylus
and straps.

(2) This option requires that the Easy Upgrade option (code U) is specified.

(3) To obtain an Australian Power Cord, order part number 00375-0003-0003.

(4) This option should only be considered if the user already has a 375 or 475 Power

Supply/Charger. If it is a 375 Power Supply/Charger, it must be the Li-Ion/NiMH version.

(5) The Easy Upgrade feature allows the user to add new System Application software and

device descriptions (DDs) to the 475 for a period of 3 years. To upgrade without this
feature, the System Card would have to be sent to a Service Center.

(6) The Graphics Option enables a user to access enhanced graphical features when using

the HART or FOUNDATION fieldbus application.

(7) Device Configuration Management provides the capability to store up to 1000

configurations and print them using the Easy Upgrade Utility.

(8) Bluetooth enables communication to a PC via the Bluetooth protocol. See list of countries

with Bluetooth approval at www.fieldcommunicator.com.

(9) A fully charged Li-Ion Power Module is capable of delivering power for 20 hours of typical

field use. If requirements exceed this specification, a spare Power Module (code A) should
be specified.

Model

Product Description

475

Field Communicator

(Note 1)

Code

Communication Protocol

HART

HART and F

OUNDATION

fieldbus

(Note 2)

Code

Battery Type

Rechargeable Li-ion Power Module

Code

Power Supply/Charger

Power Supply/Charger Li-ion/NiMH US/UK/EU connection types
included

(Note 3)

Not Included

(Note 4)

Code

Language

English

German

(Available to ship Sept 09)

Japanese

(Available to ship in early 2010)

Russian

(Available to ship Sept 09)

Code

Product Certifications

ATEX, FM, CSA and IECEx Intrinsically Safe
(includes FISCO as applicable)

No Approval

Code

Easy Upgrade

Easy Upgrade Option (3 year)

(Note 5)

Not Included

Code

Included Options

Graphics (Included at no charge)

(Note 6)

Device Configuration Management (Included at no charge)

(Note 7)

Code

Bluetooth

Bluetooth Communications

(Note 8)

No Bluetooth Communication

Code

Options

Spare Battery

Spare Rechargeable Li-ion Power Module

(Note 9)

Enclosures

Protective Rubber Boot with Stand (Boot available to ship Oct 09)

Typical HART Model Number: 475 H P 1 E KL U GMT
Typical HART/Fieldbus Model Number: 475 F P 1 E KL U GMT

Summary of Contents for 475



















































































































Search results

Summary of Contents for 475

Reviews:

Related manuals for 475

Brands by name

Popular brands

Emerson 475, User Manual

Search results

Summary of Contents for 475

Reviews:

Related manuals for 475

Brands by name

Popular brands