Emerson 475 User Manual Download Page 82 | Manualshive

Page: 82 / 114

background image

A-2

Shock

Passes the 1-meter drop test onto concrete

General Guidelines

• Only use new, original parts.

• Do not recharge the battery in hazardous areas.

• Have repairs done by only qualified personnel.

• Charge or power using only the Field Communicator power supply/charger.

CONNECTION
SPECIFICATIONS

HART and Fieldbus
Communication Terminals

Three 4mm banana plugs (one common terminal to both HART and F

OUNDATION

fieldbus.)

Connection Types

IrDA Port

± 15 degrees recommended maximum angle between the 475 interface and adapter
or PC.

18 in. recommended maximum distance between the 475 interface and adapter or PC.

Bluetooth Interface

The Bluetooth Interface is a licensed option for the 475 Field Communicator. If your
475 is not licensed for Bluetooth, it does not have a Bluetooth radio.To use Bluetooth
you need an approved adapter using the Windows Bluetooth software and drivers
included with Windows XP Professional Service Pack 2 or 3 or Windows Vista
Business Service Pack 1. The adapter should be plug-and-play if no other Bluetooth
software or drivers were installed on your PC. The Easy Upgrade Utility cannot
communicate with an adapter using third-party drivers. See
www.fieldcommunicator.com or the readme file for more information.

30 feet (10 meters) recommended maximum distance between the 475 and a
Bluetooth adapter attached to a PC.

Card Reader

Only supported card readers can be used with the System Card. Unsupported card
readers may corrupt files. See the readme file on your Resource CD or
www.fieldcommunicator.com for the list of supported card readers.

The card reader can be used only with the Field Communicator Easy Upgrade Utility.

BATTERY SPECIFICATIONS

Battery Type

Two rechargeable Li-Ion

cells, not serviceable

Connection

Green six-pin mini din (female) jack on the side of the battery

Charge

+50°F to +104°F (10°C to +40°C)

Guidelines for the Li-Ion Battery (Power Module)

• Do not recharge the battery in hazardous areas. The power supply/charger is not

IS-approved.

• Charge or power using only the Field Communicator power supply/charger.

• Recharge the battery frequently, preferably after each use. Limit full discharges, if

possible.

«
...
80
81
82
83
84
...
»

Summary of Contents for 475



















































































































Reviews:

No comments

Related manuals for 475

Brand: Samsung Pages: 2

Brand: Samsung Pages: 78

Brand: Samsung Pages: 34

Brand: Samsung Pages: 38

Brand: AbleNet Pages: 8

Brand: AbleNet Pages: 9

Brand: T-Mobile Pages: 103

Brand: Radio Shack Pages: 56

Brand: Samsung Pages: 72

Brand: Samsung Pages: 33

Brand: SoftBank Pages: 36

Brand: TCL Pages: 20

Brand: Sony Ericsson Pages: 54

Brand: i-mobile Pages: 64

Brand: Samsung Pages: 158

Brand: Samsung Pages: 179

Brand: Samsung Pages: 159

Brand: Samsung Pages: 162

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands