Emerson 475 User Manual Download Page 36 | Manualshive

Page: 36 / 114

background image

HART Functionality

3-2

BASIC FEATURES AND
FUNCTIONS

HART Application
Functionality

The HART Application lets you communicate with and configure HART devices that
are connected to the 475 Field Communicator. You can also create and edit
configurations and run diagnostics.

Using a Fast Key Sequence

A Fast Key sequence is a sequence of numerical button presses, corresponding to the
menu options that lead you to a given task. See your device documentation for fast key
sequence options.

STARTING THE HART
APPLICATION

To start the HART Application:

1. Press and hold the Power key until the green light on that key blinks to turn on the

475 Field Communicator.

2. Double-tap

HART Application

from the Field Communicator Main Menu. If a live

HART device is connected to the 475 Field Communicator, the HART Application
Online menu appears automatically. If a device is not connected, the HART
Application main menu appears after a few seconds. See Figure 3-1.

To return to the Field Communicator Main Menu, press the left arrow key on the
keypad or tap the back arrow on the window.

From the HART Application main menu, you can choose Offline, Online, Utility, or
HART Diagnostics functions. The rest of this section guides you through the HART
Application menus and functions.

Figure 3-1. HART Application Main Menu

«
...
34
35
36
37
38
...
»

Summary of Contents for 475



















































































































Reviews:

No comments

Related manuals for 475

Univerge SV8100

Brand: NEC Pages: 4

Brand: Valore Pages: 5

Brand: Datawind Pages: 28

StarLink Connect Series

Brand: NAPCO Pages: 40

TracFone SGH-T155G Series

Brand: Samsung Pages: 56

TracFone SGH-T245G

Brand: Samsung Pages: 88

Trender SPH-M380

Brand: Samsung Pages: 192

Brand: Uniden Pages: 41

Brand: Netway Pages: 68

Yealink SIP-T20P

Brand: Yealink Pages: 2

Brand: BenQ Pages: 97

Brand: B Mobile HK Pages: 43

Brand: SAIET Pages: 49

One Touch Scribe easy 8000A

Brand: Alcatel Pages: 23

Brand: Nortel Pages: 112

Brand: NUU Mobile Pages: 16

Brand: Samsung Pages: 40

Brand: Samsung Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands