41
© 2021, Elon Group AB. All rights reserved.
1) Other cooking zones will stay on if they were already
turned on.
2 The red dot next to the power level indicator will light
up, indicating that a zone is selected.
You can use this feature to boil water and it will
remind you that the water is boiling.
Activate the boiling cue function
Touch to select a heating zone.
3.4.8 Using the stop and go control
1. When the cooking zones are turned on, touch the ”
”
control, and all the displays will show ” ” and stop heating.
The only controls that can be operated now are ”
” and ”
”.
2. Touch ”
” again; the displays will show their original
settings, and the cooking zones will resume heating.
3.4.9 Using the boiling cue control
Touch the boiling cue control
, the zone indicator shows “2L”.
Touch the boiling cue control
again, the zone indicator shows “3L”.
Touch the boiling cue control
for the third time, the zone indicator shows “5L”.
Touch the boiling cue control
for the fourth time, the zone indicator shows “0”.
Cancel the boiling cue function
Touch to select a heating zone.
a: Touch the slider control to adjust the coo-
king zone to the level you select.
OR
b: Touch the function control
, and the
cooking zone will revert to your selection.
• It is important that the water temperature is neither too hot
nor too cold when cooking begins, as this could affect the final
result.
• Once the water has boiled, a series of beeps is heard and the
zone indicator flashes. Press briefly on the boiling cue control
.
• Use pans with a diameter that matches the
diameter of the graphic for the selected zone.
• Do not use cast iron cookware.
• Do not use a lid.
3.4.10 Default working times
Automatic shut-down is a safety protection feature for your
induction hob. It turns off the hob
automatically if you ever forget to turn it off after cooking. The
default working times for various
power levels are shown in the below table:
Power level
Keep warm
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
8
4
4
4
2
2
2
When the pan is removed, the induction hob can stop heating immediately and the hob
automatically switches off after 2 minutes.
People with a heart pacemaker should consult with their doctor before using this
unit.
Setting more zones
The steps for setting more zones are similar to the steps for
setting one zone.
When you set the time for several cooking zones simultan-
eously, red dots appear for the relevant cooking zones. The
minute display shows the shortest timer setting. The dot for the
corresponding zone flashes.
The display appears as below:
(set to 15 minutes)
(set to 45 minutes)
When the countdown timer expires,
the corresponding zone will switch off.
Then it will show the new shortest time set-
ting and the dot for the corresponding zone
will flash.
The display appears as shown on the right:
When you touch to select a heating zone,
the
corresponding timer will be shown in the timer
indicator.
(set to 30 minutes)
