38
39
© 2021, Elon Group AB. All rights reserved.
3.4 How to use
3.4.1 Start cooking
Touch the ON/OFF control. After
power on, the buzzer beeps once,
the timer control shows “00”
，and the heating zone selection
control shows “ ” or “ ” or “ ”,
indicating that the induction hob
has entered standby mode.
Place a suitable pan on the
cooking zone that you wish to
use.
• Make sure the bottom of the
pan and the surface of the
cooking zone are clean and dry.
Touch the heating zone selection
control – an indicator
will flash for the zone you
selected.
Adjust the heat setting by
touching the slider control.
• If you don’t choose a heat
setting within 1 minute, the
induction hob will automatically
switch off. If this happens you
will need to start again at step
two.
• You can adjust the heat setting
at any time during cooking.
Touch to select the heating zone that
you wish to switch off.
Turn the cooking zone off
by touching the slider to the
left. Make sure the display
shows “0”.
Turn the whole hob off by touching the
ON/OFF control.
Beware of hot surfaces
The letter H shows which cooking zone
is hot to touch. It will disappear when
the surface has cooled down to a safe
temperature. This can also be used
as an energy-saving function – if you
want to heat further pans you simply
use the heating zone that is still hot.
3.4.2 Finish cooking
If the display flashes
alternately with the heat
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking
zone.
No heating takes place unless there is a suitable pan on the
cooking zone.
The display will automatically turn off after 1 minute if no
suitable pan is placed on the hob.
