2009 by ELTRA GmbH Germany – July 2009 – Service Manual Thermostep
Page 76
4.4 List of Abbreviations/Figures
BS
–
Backside
FI
–
Furnace inside
FS
–
Frontside
TS
–
Topside
LHS –
Left Hand side
RHS –
Right Hand side
TGA –
Thermogravimetric Analyser
1. Starting up
Page 5:
Fig. 1.1:
Caroussel adaptor – inserted at the lower heating element
Page 6:
Fig. 1.2:
LHS – Guidance of Carouseladaptor
Page 7:
Fig. 1.3:
FI – Steel surround of the lower heating element
Page 8:
Fig. 1.4:
Cylinder of Carousel with sensor
Page 10:
Fig. 1.5:
LHS - Glass Chimney of the balance
Page 11:
Fig. 1.6:
RHS - Main board
Page 12:
Fig. 1.7:
FI - Purging port at the upper heating element
Page 13:
Fig. 1.8:
FI - Internal Blower
Page 14:
Fig. 1.9:
LHS – Home sensor
Page 15:
Fig. 1.10: LHS – Move sensor
Page 17:
Fig. 1.11: RHS – Sensor of Cover
Page 18:
Fig. 1.12: RHS – Chokes of cover
Page 18:
Fig. 1.13: BS – Connector for exhaust air tube
Page 19:
Fig. 1.14: LHS – Lower left side panel with notch for exhaust air tube
2. Malfunctions
Page 20:
Fig. 2.1:
BS – Connector for compressed air
Page 21 :
Fig. 2.2 :
FS – Front with manometers and flowmeter
Page 21:
Fig. 2.3:
LHS – Balance cable
Page 22:
Fig. 2.4:
RHS – Balance display and –operatingelements
Page 23:
Fig. 2.5:
RHS – Connecting cable of board
Page 26:
Fig. 2.6:
RHS – Metal sheet with gas pressure switch
Page 31:
Fig. 2.7:
LHS – Choke at the 2. valve
3. Service
Page 32:
Fig. 3.1.1: RHS – Removed left upper side panel and isolation plate
Page 33:
Fig. 3.1.2: RHS - External measurement of furnace temperature
Page 34:
Fig. 3.2.1: LHS – Removal of the valveblock
Page 34:
Fig. 3.2.2: LHS – Manual check of valve functionality
Page 35:
Fig. 3.2.3: LHS – Markings of the tubes
Page 35:
Fig. 3.2.4: LHS – Unfasten of the power supply of the valve
Page 36:
Fig. 3.2.5: LHS – Removal of the valve from the metal rail
Page 37:
Fig. 3.3.1: Cylinder of Caroussel
Page 38:
Fig. 3.5.1: RHS – Unfasten the mainboard
Page 39:
Fig. 3.5.2: RHS – Plugs at the mainboard
