2009 by ELTRA GmbH Germany – July 2009 – Service Manual Thermostep
Page 41
Fig. 3.6.3: FI – Cover of internal blower
e.)
Fix the metal plate at the new blower so that the blower can be lowered without
contact to the lower metal plate inside the furnace.
f.)
Put the new blower to its well and test its functionality.
3.7
Change of cylinder of internal blower
Required tools:
8 mm open-ended wrench
a.)
Unfasten the 4 x 8 mm screws that fasten the front metal plate.
Fig. 3.7.1: LHS/RHS – Unfasten of front metal plate
b.)
Hinge out the front metal plate to get free access to the cylinder of the internal blower.
