VP-12, VP-12P IP phones. Operation manual
68
2.2.3.9 «Management interface» submenu
Use this menu to configure the network interface and establish the device network management via HTTP,
HTTPS, and Telnet.
•
Enable Management Interface
– when checked, device management will be performed via this interface
.
•
Access Type
–
defines interface operation mode:
•
Tagged –
data is transferred by the interface with the defined VLAN ID;
•
Untagged –
data is transferred by the interface without VLAN.
•
VLAN ID –
identifier for interface extract into virtual local area network.
•
802.1P
–
802.1P attribute (another name: CoS – Class of Service), assigned to the outgoing IP
packets from this interface. It may take values from 0 (the lowest priority) to 7 (the highest
priority).
•
Protocol
– select address assigning protocol for the interface:
•
Static
– operation mode where IP address and all the necessary settings for LAN
interface are assigned manually.
•
DHCP
– operation mode where IP address, subnet mask, DNS address and other
necessary settings for the interface operation (e.g. static routes) are automatically
obtained from DHCP server.
Static
When «Static» type is selected, the following parameters will be available for editing:
•
IP address
–
specify the IP address for the management interface;
•
Netmask
–
subnet mask for the management interface;
•
Default Gateway
– default gateway IP address for the management interface;
•
1st DNS Server, 2nd DNS Server
– DNS IP addresses required for the gateway autoconfiguration
protocols' operation; to configure protocols, use
System — Autoprovisioning
page.
