VP-12, VP-12P IP phones. Operation manual
90
URL examples:
tftp://download.server.loc/firmware.tar.gz,
http://192.168.25.34/configs/vp-12(p)/mycfg.tar.gz,
tftp://server.tftp/$PN/config/$SN.tar.gz,
http://server.http/$PN/firmware/$MA.tar.gz etc.
At that, some URL parameters might be omitted. For example, configuration file may be specified in the
following format:
http://192.168.18.6/ or config_
vp12.tar.gz
If the system is unable to extract the necessary file downloading parameters (protocol, server address or path
to file on server) from configuration file or firmware file URL, it will attempt to extract an unknown parameter
from DHCP Option 43 (Vendor specific info) or 66 (TFTP server) and 67 (Boot file name), when address
obtaining via DHCP is enabled for the Internet service (DHCP option format and analysis will be provided
below). If the system is unable to extract missing parameter from DHCP options, default value will be used:
•
protocol: tftp;
•
server address: update.local;
•
configuration file name: $MAC.cfg;
•
firmware file name: vp12.fw.
Thus, if you leave
'Configuration file'
and
'Firmware file'
fields empty, and Options 43 or 66, 67 with file locations
are not obtained via DHCP, configuration file URL will be as follows:
tftp://update.local/A8.F9.4B.00.11.22.cfg
,
and the firmware file URL:
tftp://update.local/
vp12
.fw
.
If 'DHCP options' value is selected, configuration file and firmware file URLs will be extracted from DHCP
Option 43 (Vendor specific info) or 66 (TFTP server) and 67 (Boot file name), wherefore address obtaining via
DHCP should be enabled for the Internet service (DHCP option format and analysis will be provided below). If
DHCP options fail to provide some of the URL parameters, default parameter value will be used:
•
protocol: tftp;
•
server address: update.local;
•
configuration file name: $MAC.cfg;
•
firmware file name: vp12.fw.
Option 43 format (Vendor specific info)
1|<acs_url>|2|<pcode>|3|<username>|4|<password>|5|<server_url>|6|<config.file>|7|<firmware.file>
1 – TR-069 autoconfiguration server address code;
2 – «Provisioning code» parameter specification code;
3 – code of the username for TR-069 server authorization;
4 – code of the password for TR-069 server authorization;
1. Inspite of the filename $MAC.cfg, the file format should be in .tar.gz extension
2. Inspite of the firmware name vp12.fw, the file format should be .tar.gz extension
