VP-12, VP-12P IP phones. Operation manual
42
Service settings
•
Call Waiting
– when checked, the subscriber will accept incoming calls while being in a call state,
otherwise '484 Busy here' reply will be sent.
•
DND
– when checked, temporary restriction is placed for incoming calls (DND service – Don’t Disturb).
•
Stop Dial At #
– when checked, use '#' button on the phone unit to end the dialing, otherwise '#' will be
recognized as a part of the number.
•
CLIR
– limitation of caller number identification:
•
Off
– CLIR service is disabled;
•
SIP:From
–
Anonymous sip:[email protected]
will be transmitted in the
'From'
header of
SIP messages
;
• SIP:From and SIP:Contact –
Anonymous sip:[email protected]
will be sent in the
'From'
and
'Contact'
headers of SIP messages.
•
Hotline
– when checked, 'Hotline' service is enabled. This service enables an outgoing connection
automatically without dialling the number after the phone handset is picked up with the defined delay (in
seconds). When checked, fill in the following fields:
•
Hot Number
–
phone number that will be used for connection establishment upon 'Delay timeout'
expiration after the phone handset is picked up (in SIP profile being used, a prefix for this direction
should be defined in the dilaplan);
