VP-12, VP-12P IP phones. Operation manual
31
2.2.1.8 «SNMP» submenu
VP-12(P)
software allows you to monitor status of the device and configure it via SNMP protocol. In SNMP
submenu, you can configure settings of SNMP agent. Device supports SNMPv1, SNMPv2c protocol versions.
•
Enable SNMP
–
when checked, SNMP will be enabled for utilization;
•
roCommunity
–
password for parameter reading (common: public).
•
rwCommunity
–
password for parameter writing (common: private).
•
TrapSink
–
IP address or domain name of SNMPv1-trap message receiver in HOST [COMMUNITY
[PORT]] format.
•
Trap2Sink
–
IP address or domain name of SNMPv2-trap message receiver in HOST [COMMUNITY
[PORT]] format.
•
InformSink
–
IP address or domain name of Inform message receiver in HOST [COMMUNITY [PORT]]
format.
•
Sys Name
–
device name;
•
Sys Contact
–
device vendor contact information;
•
Sys Location
–
device location information;
•
Trap Community
–
password in traps (by default trap).
To store settings into the non-volatile memory, click
'Apply'
button. To discard changes, click
'Cancel'
button.
