VP-12, VP-12P IP phones. Operation manual
28
•
Action
– an action to be performed on packets (reject/skip).
When TCP, UDP, TCP/UDP are selected, the following settings will become available for editing:
•
Source ports
– list of source ports with packets falling under the rule (a single port or port range
delimited by '-' is permitted).
•
Destination ports
– list of destination ports. The packets of a destination port fall under this rule (a single
port or port range delimited by '-' is permitted).
When ICMP protocol is selected, the following setting will be available for editing:
•
Message type
– you may create a rule for the specific ICMP message type only or for all ICMP message
types.
.
2.2.1.6 «MAC filter» submenu
In the 'MAC filter' submenu, you may configure access filtering by client's MAC address.
Wired Connection Filter Mode
– define one of the three filter operation modes depending on the client's
MAC address:
•
Disabled
–
MAC address filtering is disabled, all clients are allowed to connect to the device;
•
Deny
– in this filter operation mode, clients with MAC addresses from the 'MAC address list' are
denied to connect to the device. Subscribers with unlisted MAC addresses are allowed to connect
to the device;
•
Allow
– in this filter operation mode, clients with MAC addresses from the 'MAC address list' are
allowed to connect to the device. Subscribers with unlisted MAC addresses are denied to connect
to the device.
Click
'Apply'
button to add a new rule. To discard changes, click
'Cancel'
button. To remove the record
from the list, select the checkbox next to the respective record and click
'Delete'
.
