background image

  VP-12, VP-12P IP phones. Operation manual

43

Hot Timeout, s

 – 

time interval that will be used for connection establishment with the opposite 

subscriber, in seconds.

Redirection parameters

CFU

 – when selected, CFU (Call Forward Unconditional) service is enabled – all incoming calls will be

 

forwarded to the specified call forward unconditional number. 

CFU Number

 

– number that all incoming calls will be forwarded to when Call forward

 

unconditional service is enabled (in SIP profile being used, a prefix for this direction should be 
defined in the dialplan).

CFB 

– when selected, CFB (Call Forward on Busy) service is enabled—forward the call to the specified

 

number, when the subscriber is busy.

CFB Number

 

– number that incoming calls will be forwarded to when the subscriber is busy and

 

Call forward on busy service is enabled (in SIP profile being used, a prefix for this direction should 
be defined in the dialplan).

CFNR

 – when selected, CFNA (Call Forward on No Answer) service is enabled—forward the call, when

 

there is no answer from the subscriber.

CFNR Number

 

– number that incoming calls will be forwarded to when there is no answer from the

 

subscriber and 'Call forward on no answer' service is enabled (in SIP profile being used, a prefix for 
this direction should be defined in the dialplan);.

CFNR Timeout

 – time interval that will be used for call forwarding when there is no answer from

 

the subscriber, in seconds.

When multiple services are enabled simultaneously, the priority will be as follows (in the descending 
order):

CFU;

DND;

CFB, CFNA.

Summary of Contents for VP-12


































































































Reviews: