ELTEX VP-12 Operation Manual Download Page 63

Page: 63 / 97

VP-12, VP-12P IP phones. Operation manual

2.2.3.6 «Firmware upgrade» submenu

In «Firmware upgrade» submenu you may update the firmware of the device.

•

Active Version of Firmware –

installed firmware version.

•

Check for upgrade –

click this button to check the availability of the latest firmware version. With this

function, you may quickly check the latest firmware version and update the firmware, if necessary.

•

Firmware backup version

– installed firmware version which can be used in case of problems with the

current active firmware virsion.

•

Activate

– buttom allowing you to make a backup of the active firmware version. In order to get that

done reboot the device.

You may update the device firmware manually by downloading the firmware file from the web site

http://eltex-

co.ru/support/downloads/

and saving it on the computer. To do this, click the 'Select file' button in the

'Firmware update file'

field, and specify path to firmware .tar.gz format file.

To launch the update process, click

'Upload file'

button. The process may take several minutes (its current

status will be shown on the page). The device will be automatically rebooted when the update is completed

Firmware update check function requires Internet access.



Do not switch off or reboot the device during the software update.



Summary of Contents for VP-12


































































































Search results

Summary of Contents for VP-12

Reviews:

Related manuals for VP-12

Brands by name

Popular brands

ELTEX VP-12, Operation Manual

Search results

Summary of Contents for VP-12

Reviews:

Related manuals for VP-12

Brands by name

Popular brands