VP-12, VP-12P IP phones. Operation manual
52
Example
4: (S0 <:82125551234>) – quickly dial the specified number, similar to 'Hotline' mode.
Example
5: (S5 <:1000> | xxxx) – this dialplan allows you to dial any number that contains digits, and if there
was no entry in 5 seconds, dial number '1000' (for example, it belongs to a secretary).
Example
6: (8, 10x.|[email protected]:5060) – this dialplan allows you to dial any number beginning with 810
and containing at least one digit after '810' (after entering '8', 'station reply' tone will be generated) as well as 3-
digit numbers beginning with 1. Subscriber calls with 3-digit numbers beginning with 1 will be sent to IP
address 10.110.60.51 and port 5060.
Example
7: (S3 *xx#|#xx#|#xx#|*xx*x+#) – managmet and usage of VAS.
2.2.2.3 «Common SIP settings» submenu
•
STUN Server Address
–
STUN server IP address or domain name; you may specify an alternative server
port after the colon (default value is 3478).
•
STUN Request Sending Interval, s –
time period that defines transmission of a request to STUN server.
The less the polling period, the faster the response to the public address changes.
•
Tones Specification
– selecting country to determine tone specification used.
To apply a new configuration and store settings into the non-volatile memory, click
'Apply'
button. To
discard changes, click
'Cancel'
button
To apply new configuration and save settings into non-volatile memory of the device, click '
Apply
'
button. To discard changes, click '
Cancel
' button.
