Elnec BeeHive204, User Manual

Page: 151 / 179

PG4UW MC
151
which allows to program different data to different types of devices at the same time in each
Site.
Checkbox Auto-load recent project(s), when connecting Sites
When checked, recent project(s) are automatically loaded every time programmer Sites (their
PG4UWs) are started and connected to PG4UWMC. Sites connecting to PG4UWMC can be
performed by two ways:
automatically, after starting of PG4UWMC (see information about checkbox Auto-connect
Sites bellow)
manually by clicking button Connect programmers in main windows of PG4UWMC
Checkbox Auto-connect Sites
When checked, Sites are automatically connected after PG4UWMC start (user does not need
to press Connect programmers button after starting of PG4UWMC).
Checkbox Force gang multiprogramming mode
Standard mode of multiprogramming operation on our multiprogrammers is concurrent
multiprogramming mode , when each programming site works independently and operator
can re-load programmed device while other programming sites are running. In gang
multiprogramming mode predefined operation starts on all programming sites at a time
by pressing any YES! button.
Notes:
Works for all active (present and enabled) sites.
Start is blocked while any site is busy.
In this mode Automatic YES! is disabled.
Panel Log file are used to set mode of using Log file report
Log file is text file containing information about PG4UWMC control program operation flow,
which means information about loading project files, device operation types and device