Elnec BeeHive204, User Manual

Page: 126 / 179

Elnec s. r. o.
126
File format masks is used for setting file-name masks to use as a filter for file listing in File /
Save and File / Load file window for all file formats. Mask must contain one of wildcards (*, ?)
at least and must be applied correctly by syntax.
Note: More masks can be specified for each file format. Semicolon is used as delimiter for
extensions.
Example:
Motorola:
*.MOT;*.S19
Defines two file masks *.MOT and *.S19 - for Motorola file format.
Project file default extension is used for setting project files-extension used as default
extension in File / Load project and File / Save project dialogs.
Buffer
Checkbox Erase buffer before selecting of new device allows setting automatically erase
main buffer when user selecting new device. This can be useful for some kind of special
devices, which require exact type of data at certain addresses, and the data are not part of
data file loaded to main buffer for this device.
Main buffer can be erased (filled) with default "blank" value for selected device or with custom-
defined value. This can be controlled by selection group box
Erase value and Custom erase
value edit field. Main buffer means the first buffer available for viewing/editing in dialog
View/Edit buffer (menu Buffer / View/Edit ...).
Note: The setting is saved to PG4UW configuration .ini file. It is not saved to project file.
Language
This page allows you to select another language for user interface such as menu, buttons,
dialogs, information and messages. It also allows selecting wished help file in another
language. For another language support of user interface the language definition file is
required.
Sound
Panel Sound settings page allows user to select the sound mode of program. Program
generates sounds after some activities, e.g. activities on device (programming, verifying,
reading, etc.). Program generates sound also when warning or error message is displayed.
User can now select sound from Windows system sound (required installed sound card), PC
speaker or none sound.
Panel Allow sound for following actions contains following options:
Check box Successful operation
When checked, sound will be generated after device operation successfully completed.
When unchecked, no sound will be generated after successful device operation.
Check box In case of error
When checked, sound will be generated after device operation is finished with error.
When unchecked, no sound will be generated after device operation finished with error.
In the panel Programmer internal speaker sound settings is possible to set sound options
for some programmers with built-in internal speaker. Sound beeps are then generated from
internal programmer speaker after each device operation for indicating device operation result:
good or bad result.