Elnec BeeHive204, User Manual

Page: 49 / 179

BeeProg2 / BeeProg2C
49
configuration and security bit program
illegal bit test
checksum
interprete the Jam Standard Test and Programming Language (STAPL), JEDEC standard
JESD-71
interprete the VME files compressed binary variation of SVF files
security
insertion test
contact check
ID byte check
special
production mode (automatic start immediately after device insertion)
multi-project mode
lot of serialization modes (more type of incremental modes, from-file mode, custom
generator mode)
statistic
count-down mode
Buffer operations
view/edit, find/replace
fill/copy, move, byte swap, word/dword split
checksum (byte, word)
print
File load/save
no download time because programmer is PC controlled
automatic file type identification
Supported file formats
unformatted (raw) binary
HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-HEX,,
ASCII HEX, Renesas Consolidated HEX
Altera POF, JEDEC (ver. 3.0.A), e.g. from ABEL, CUPL, PALASM, TANGO PLD, OrCAD
PLD, PLD Designer ISDATA, etc.
JAM (JEDEC STAPL Format), JBC (Jam STAPL Byte Code), STAPL (STAPL File) JEDEC
standard JESD-71
VME (ispVME file VME2.0/VME3.0)
SVF (Serial Vector Format revision E)
STP (Actel STAPL file)
GENERAL
operating voltage 100-240V AC rated, 90-264 VAC max., 47-63 Hz
power consumption max. 20W active, about 2W sleep
dimensions 195x140x55 mm (7.7x5.5x2.2 inch)
weight 0.9kg (1.98 lb)
operating temperature 5°C ÷ 40°C (41°F ÷ 104°F)
operating humidity 20%...80%, non condensing