Elnec BeeHive204, User Manual

Page: 150 / 179

Elnec s. r. o.
150
Options / General options
PG4UWMC General options dialog is used to set or display configuration options of
PG4UWMC.
panel Multiprogramming
There is table which contains following columns:
column Sites contains checkboxes with Site numbers #1, #2, #3, #4 used to enable/disable
using individual Programmer Site with specified Site number
column Serial number S/N contains information about serial numbers for Programmer Sites
column Site name
column Project file contains edit lines Project: #1, Project: #2 ...Project: #4 for setting
individual projects to be loaded after running each PG4UW. Project file names can be
entered manually or by dialog
Select project file , which can be opened for each Site by
clicking on button "..." placed on the right side of each project edit line. If the project name
edit line is blank, the automatic project load will not be performed.
column Device in project file
Checkbox Use one common project for all Sites is placed under the Sites numbers and
Projects table.
When there is requirement to program the same device types with the same data, the
checkbox should be checked.
If the checkbox is checked, one common project file will be used for all Programmer Sites. In
this mode all Sites are using the same shared buffer of project data and program the same
device type.
If the checkbox is not checked, each Site will use its own project file defined by name in table
of Sites in column Project file . In this mode each Site is using its own buffer of project data,