Elnec BeeHive204, User Manual

Page: 48 / 179

Elnec s. r. o.
48
package support includes DIP, SDIP, PLCC, JLCC, SOIC, SOP, PSOP, SSOP, TSOP,
TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA,
VFBGA, UBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP etc.
Devices in non-DIP packages up to 48 pins are supported by universal programming
adapters - if it is technically possible on the BeeProg2 programmer. That means if reliability
of operations when used universal programming adapter is below industrial standard, the
specialized programming adapters are necessary to use.
programmer is compatible with third-party adapters for non-DIP support
Programming speed
Note:
It is important to know, we always use random numbers data pattern for programming speed
testing. Some our competitors use "sparse" data pattern, where only few non-blank data are
programmed or are there are used data with only few 0 bits (FE, EF, etc.). This cheating
approach can "decrease" programming time considerable. If you plan to compare, always
ask which pattern they use.
The programming speed depends on PC speed only slightly, of course at condition the CPU
usage is below 100%.
If the programmer attached to PC through LPT port, the programming of high-capacity
memories will take considerable longer time.
Device Size [bits] Operation Time
K8P6415UQB (parallel NOR Flash) 400100hx16 bit (64 Mega) programming and verify 13 sec
MT29F1G08ABAEAWP (parallel NAND Flash) *2 8400000Hx8 (1 Giga) programming and verify 51 sec
THGBM3G4D1FBAIG (eMMC NAND Flash) *2 2048 MB x8 (16 Giga) programming *1 363 sec
QB25F640S33 (serial Flash) 800200Hx8 (64 Mega) programming and verify 30.7 sec
AT89C51RD2 (microcontroller) 10000Hx8 programming and verify 14.4 sec
PIC32MX360F512L (microcontroller) 80000Hx8 programming and verify 8.9 sec
Conditions: Intel Core2Duo 6300 1.86GHz, 1GB RAM, USB 2.0 HS, Win XP, software
PG4UW v3.03.
*1 Implementation is the same as in card readers. Verification of programming is performs
internal controller. Internal controller confirms the proper programming using status register.
*2 The programming time is for TurboMode active.
SOFTWARE
Algorithms: only manufacturer approved or certified algorithms are used. Custom
algorithms are available at additional cost.
Algorithm updates: software updates are available regularly, approx. every 4 weeks, free of
charge. OnDemand version of software is available for highly needed chips support and/or
bugs fixes. Available nearly daily.
Main features: revision history, session logging, on-line help, device and algorithm
information
Device operations
standard:
intelligent device selection by device type, manufacturer or typed fragment of part name
automatic ID-based selection of EPROM/Flash EPROM
blank check, read, verify
program
erase