Elnec BeeHive204, User Manual

Page: 115 / 179

PG4UW
115
Programmer
Menu Programmer includes commands used for work with programmers.
Programmer / Find programmer
Select programmer and communication parameters in PG4UW software.
Programmer in this section is shown list of all programmers available in current version of
PG4UW software. Select the programmer which you want to connect. If option
Search all is selected, then PG4UW will try to find any of supported
programmers and first found programmer will be connected.
Port in this section is shown list of all communication ports available for selected
programmer. Select communication port where the programmer is physically
connected. If you aren't sure with type of communication port, where the
programmer is connected, select
All ports .
Connect click this button to start scanning selected communication port(s) for selected
programmer. Upon connecting selected programmer which is different than
programmer connected previously, the list of default devices will be cleared,
except last device if it's supported on new programmer.
DEMO click this button to set PG4UW to demo mode with selected programmer. In
this case the PG4WU software doesn't scan the communication ports for
selected programmer. Upon setting software to demo mode with selected
programmer which is different than previous programmer, the list of default
devices will be cleared, except the last device if it's supported on new
programmer.
Cancel click this button to close Find programmer dialog without changes.