Elnec BeeHive204, User Manual

Page: 138 / 179

Elnec s. r. o.
138
For multiprogramming by PG4UWMC or standalone programmer:
Load Multi-project by Load project menu.
Run wished device operation by one of available device operation buttons (Blank, Verify,
Program, Erase); mostly Program device operation is used. Selected device operation is
executed as sequence of sub-project loading and consequent sub-device programming for
each sub-device defined in Multi-project. The side effect of this concept is that device
progress indicators are reset to 0 at beginning of each sub-device operation, so it looks like
progress bar is "jumping" to 0 few times while multichip operation is running.
After programming of all sub-devices is completed (or error occurs), information with result of
device operation is displayed in PG4UWMC. Programmed device can be removed from
programmer socket and new device can be inserted. Pressing operation button for the Site
or YES! button on programmer Site, will start multichip device programming sequence again.
If Automatic YES! function is turned on; sequence of device operation is started again
automatically after removing of programmed and inserting of new device to programmer
socket. For more details about Automatic YES! function; please take a look at
Programmer /
Automatic YES! .
Notes:
Serialization is not supported in multiprogramming mode (only single programming supports
serialization).
Count-down function is not supported now.
Options / Save options
This command saves all settings that are currently supported for saving, even if auto-save is
turned off. Following options are saved:
settings of recently used programmer
settings of recently selected device - device options and special device options, if available
(no device data buffers are saved)
list of 20 last selected devices with their actual device options settings (no data buffers are
saved)
options under the Options menu (General options and also current configuration of main
window toolbars)
recent files/projects list (names of up to 10 recently used files and names of up to 10
recently used projects)
main program window and some sub-windows - position and size
Help
Menu Help contains commands that let you view supported devices and programmers and
information about program version too.
Pressing the <F1> key accesses the Help. When you are selecting menu item and press <F1> ,
you access context-sensitive help. If PG4UW is executing an operation with the programmer
<F1> generates no response.
The following Help items are highlighted:
words describing the keys referred to by the current Help
all other significant words
current cross-references; click on this cross-reference to obtain further information.