Elnec BeeHive204, User Manual

Page: 114 / 179

Elnec s. r. o.
114
system through ISP connector. It is indicated by [PLCC44] (VME) or (ISP-VME) suffix after
name of selected device in control program. Multiple devices are possible to program and test
via JTAG chain: JTAG chain (ISP-VME).
More information on the website: http://www.latticesemi.com
Software tools:
Lattice:
ispLEVER, IspVM System ISP Programming Software, PAC-Designer Software,
svf2vme utility (converts a serial vector file to a VME file)
Introduction to DirectC
The DirectC is designed for programming Microsemi's PolarFire, RTG4, IGLOO2,
SmartFusion2, ProASIC3 (including ProASIC3 nano), IGLOO (including IGLOO nano),
SmartFusion and Fusion devices. The DirectC requires a programming data binary file that can
be generated by Libero SoC. More information on the website: https://www.microsemi.com
The DirectC Player is a program that reads the DAT file and applies vectors for programming
and testing of devices in a JTAG chain. The devices can be programmed in ZIF socket of the
programmer or in target system through ISP connector.
Appropriate programming operation can be selected in Device operation options dialog by
pressing button DirectC configuration ... and selecting allowed Action.
Device / Device info
The command provides additional information about the current device - size of device,
organization, programming algorithm and a list of programmers (including auxiliary modules),
that supported this device. You can find here package information and other general
information about current device too.
The reserved key <Ctrl+F1> will bring out this menu from any menu and any time immediately.