manualshive.com logo in svg

TYAN S5161, Manual

Share
Download
TYAN S5161 Manual Download Page 1

1 

http://www.tyan.com 

 

 

 

Tomcat i7230B 

///

S5161 

      Version 1.0

 

 

 

Copyright 

Copyright © TYAN Computer Corporation, 2005. All rights reserved. No part of 
this manual may be reproduced or translated without prior written consent from 
TYAN Computer Corp. 
 

Trademark 

All registered and unregistered trademarks and company names contained in 
this manual are property of their respective owners including, but not limited to 
the following. 
 
TYAN, Tomcat i7230B are trademarks of TYAN Computer Corporation. 
Intel, Prescott, and combinations thereof are trademarks of Intel Corporation. 
Phoenix, Phoenix-AwardBIOS are trademarks of Phoenix Technologies. 
Microsoft, Windows are trademarks of Microsoft Corporation. 
SuSE,is a trademark of SuSE AG. 
IBM, PC, AT, and PS/2 are trademarks of IBM Corporation. 
 
 

Notice 

Information contained in this document is furnished by TYAN Computer 
Corporation and has been reviewed for accuracy and reliability prior to printing. 
TYAN assumes no liability whatsoever, and disclaims any express or implied 
warranty, relating to sale and/or use of TYAN products including liability or 
warranties relating to fitness for a particular purpose or merchantability. TYAN 
retains the right to make changes to product descriptions and/or specifications 
at any time, without notice. In no event will TYAN be held liable for any direct or 
indirect, incidental or consequential damage, loss of use, loss of data or other 
malady resulting from errors or inaccuracies of information contained in this 
document.

 

 

Summary of Contents for S5161























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands