TYAN S5161, Manual

Page: 15 / 86

15
http://www.tyan.com
JP15: Front Panel Header
The Front Panel Header is used to connect some control or signal wires from
motherboard to chassis, such as HDD LED, power LED, power button, and
reset button.
JP16: Clear CMOS Jumper
3
1
Normal
(Default)
3
1
Clear
Use this jumper when you forgot your system/setup
password or need to clear system BIOS setting.
How to clear the CMOS data
- Power off system and disconnect the power
supply from the AC source
- Use jumper cap to close Pin 2 and 3 for several
seconds to Clear CMOS
-
Replace jumper cap to close Pin 1 and 2
Reconnect the power supply to the AC source
-
Power on system
J11: Tyan SO-DIMM Connector
Use this connector to connect the Tyan TARO card.
JP1/JP2: SMDC/ASF2.0 Select Header
Pin 1-2 Closed: Enable ASF2.0 support ( Default )
1
3
1 3
Pin 2-3 Closed: Enable SMDC card support
1 2 PWR LED+
HDDLED- 3 4 PWR LED-
Reset SW- 5 6 PWR SW+
Reset SW+ 7 8 PWR SW-
External INT+ 9 10 Warning LED+
External INT-
11 12
Warning LED-
+3V
SB
13 14 N/A
SMBUS Data 15 16 Chassis Intr# (Active Low)
SMBUS Clock 17 18 Chassis Intr# (Active Low)