TYAN S5161 Manual Download Page 5

Page: 5 / 86

http://www.tyan.com

Chapter 1: Introduction

1.1 - Congratulations

You have purchased one of the most powerful server solutions. The Tomcat
i7230B (S5161) is a flexible Intel

platform for multiple applications, based on

Intel

E7230 (Mukilteo) MCH and ICH7-R chipsets.

Designed to support the family of Intel

Socket 775 processors and 8GB DDR2

667/533/400 memory. The S5161 has integrated Dual Gigabit Ethernet LAN,
built-in 16MB XGI XG20

video and four serial ATA ports. This motherboard

represents the best choice for a server platform product.

Remember to visit TYAN’s Website at

http://www.TYAN.com

. There you can

find information on all of TYAN’s products with FAQs, online manuals and BIOS
upgrades.

1.2 - Hardware Specifications

Processor

•

Single LGA775 socket

•

Support Intel

Pentium

D and Celeron D CPU’s

•

1066/800/533 MHz FSB

Chipset

•

Intel

E7230 (Mukilteo) MCH

•

ICH7-R South Bridge

•

PXH-V 64-bit PCI Hub

•

SMSC SCH5017 LPC Super I/O

chip

Memory

•

Four 240-pin DDR2 DIMM sockets

•

Supports ECC DIMMs

•

Maximum of 8GB unbuffered

(Non-Reg) DDR2-667/533/400

Expansion Slots

•

One (1) PCI-X 64/133 slot in-lined

with one (1) PCIe x4 slot (routed
to PCIe x8 bus from MCH)

•

One (1) Tyan “TARO” SO-DIMM

socket, support
M7901/M7902/M9000

Integrated Video Controller

•

XGI Volari Z7 (XG20)

•

16MB frame buffer memory

Integrated ATA-100 (ICH7-R)

•

One ATA-100 channel for up to

two ATA-100 devices

Integrated SATA Controllers
(ICH7-R)

•

Supports four SATA-II ports

running at 3.0Gb/s

•

RAID 0/1/5/10 capable (Windows

Driver support only)

Integrated LAN Controllers

•

Two (2) Intel

i82573V GbE LAN

controllers

-operating at PCIe x1 interface

•

One (1) Intel

i82551QM fast

Ethernet LAN controller

-operating at PCI 32/33 interface

Summary of Contents for S5161























































































Search results

Summary of Contents for S5161

Reviews:

Brands by name

Popular brands

TYAN S5161, Manual

Search results

Summary of Contents for S5161

Reviews:

Brands by name

Popular brands