141
Multiple Hoop Embroidery With Designs
First Hooping
1.
Select designs and arrange them in the layout
screen. (Multiple hoop frame should be
selected, see page 134.)
2.
Touch key.
3.
Decide which design(s) will be sewn in first
hooping.
4.
Touch LCD screen to move frame around
design(s).
5.
Use
keys for final positioning. (Make sure
at least one complete design is within the frame
lines.)
6.
Touch key.
7.
Look at screen and remember that at least one
complete design must appear on LCD screen.
(Example has 2 complete designs; if any part of
a design is not within hoop, machine will not
sew that design.)
8.
Mark fabric with X and Y lines. See page 114 in
instruction manual. Using the screen as a guide,
position fabric in frame. Both lines must fall
within the triangular guidemarks “
∇
” on the
frame (8 total, 2 in each corner).
NOTE: Always refer to screen shown in the
above step before hooping the fabric
.
Attach frame to machine.
Summary of Contents for XQUISIT 2
