manualshive.com logo in svg

ELNA XQUISIT 2, Manual

Share
Download
ELNA XQUISIT 2 Manual Download Page 16

15

Connecting Machine to Power Supply

NOTE: Your machine should be operated at a
room temperature of 5 - 38˚C (40˚ - 100˚ F).
Extremes of temperature may affect sewing
speed.

Your machine is equipped with a detachable power
cord. First insert machine plug into machine and
then power supply plug into electrical outlet.

Optional – connect the foot control. Pull out the cord
(not past red marking) and plug into machine. When
storing the foot control, pull the cord out about 5 cm
(2") and release it to rewind.
When the foot control is connected, the         key
can be used only to stop the machine or wind
bobbin.

NOTE: Machine can be operated using only 
the         key without connecting the foot control.

NOTE: Use only foot control YC-700 (UL, CSA)
with your Xquisit II(9010).

Welcome Screen

NOTE: Only a light touch is required when
making a selection on the LCD screen. Do not
touch the surface of the screen with any hard or
sharp object, such as pencils, pens, screwdrivers,
etc. 

Press power/light switch to turn machine on.
Welcome screen will appear.

Lightly touch Welcome screen to open first screen.

Touch  

key to directly access index for sewing

instruction screens.

INDEX

Summary of Contents for XQUISIT 2




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands