73
Sewing on Buttons
On-screen manual – see stitch 1/49
Hand sewing buttons to a garment is very time
consuming.
Sew them on in one quick, easy step.
1.
Mark button placement.
2.
Place button and fabric under presser foot.
HINT: Use washable glue or transparent tape to
keep the buttons in place.
3.
Turn handwheel until needle is down inside left
hole of button. Lower presser foot.
4.
Turn the handwheel to position needle above
right hole of button. Touch the
key to
adjust needle over right hole.
5.
After you finish sewing, cut the thread leaving
10 – 15 cm (4 – 6") of thread at the button.
6.
Pull the thread to reverse side of fabric and tie
the threads.
NOTE: To create a thread shank, insert a pin into
hole on front of foot before sewing.
4.3
Summary of Contents for XQUISIT 2
