71
Bound Buttonholes
On-screen manual - see stitches 1/46, 1/48
Prepare bias cut squares. Mark buttonhole on right
side of garment and wrong side of bias squares.
Place bias cut squares on fabric with right sides
together matching guidemarks.
1/46 Sew buttonhole using same procedure
described on pages 67- 68, steps 1-10.
1/48 Sew buttonhole using same procedure
described on pages 69-70, steps 1-8.
1.
Cut down center of sewn rectangle, snipping
into each corner.
2.
Pass the bias square through slit and pull to
wrong side of garment to form the lips of
buttonhole.
3.
From wrong side, press lips into center and fold
bias fabric over lips forming a tuck at each end.
4.
From right side, align lip. Baste and press.
5.
Reinforce both ends by folding right sides
together at buttonhole end and straight stitch in
along the stitch line.
6.
Trim away excess bias fabric. Fasten bias fabric
by hand.
7.
Repeat above procedure through step 2 to form
underside of buttonhole on facing of garment.
8.
Pass bias fabric through slit and pull to wrong
side of fabric. Press flat.
1
2
3
4
5
6
7
8
Summary of Contents for XQUISIT 2
