PLDC02161
1
1250-1280 P / D, Quick guide
This guide is intended for quick consultation only and does not replace the user and maintenance manual.
Before using the machine, read the user and maintenance manual contained in the machine’s packaging thoroughly and strictly
follow all the instructions.
PREPARATION & OPERATION
Pull the STARTER lever.
Move the engine speed control lever to
the maximum position on the right.
Move the lever to the “START” position
and hold it there.
Switch the machine on by turning the
ignition key to START, when the engine
starts release the key in the ON position
and release the lever that had previously
been held in the “START” position.
Lower the main brush.
Lower the side brushes.
Activate suction using the lever, adjusting
air flow to ensure suction of the dust Do
not use suction on wet surfaces.
Press the accelerator pedal to start
travel, pressing it to the right the machine
will move forwards, pressing it to the left
the machine will move backwards.
To collect voluminous objects, press the
front flap lift pedal
To stop the machine, press the brake
pedal, which also acts as parking brake,
using the special locking lever.
Emptying the bottom unloading debris
bin, model 1250:
•
Release the bin lock.
•
Pull out the rear bin by means of its
handle.
•
Take the bin (which is fitted with
wheels) to the rubbish collection
point and empty it.
Emptying the bottom unloading debris
bin, model 1280:
•
Lift the bin to the desired height,
holding the enabling button and
moving the selector located on the
instrument panel.
•
Pull the lever to rotate the bin and
empty its contents.
OF
F O
N ST
AR
T
OF
F O
N ST
AR
T
OF
F O
N ST
AR
T
