Electrolux Professional Combi TOUCH 10 GN 1/1 User Manual Download Page 53

Page: 53 / 72

Green Spirit/Economizer

This setting allows to enable / disable (

) the “Saving

options“:

Skip rinse-aid and boiler descale. It allows
to skip the rinse aid phase and descale
the boiler.

Skip drying phase. It allows to skip drying
phase.

Time to save. It allows to shorten the
cleaning time.

Accessories

This setting allows to: enable / disable (

) the following

feature/options:

SkyDuo/
Match

If available in your model

USB food probe

Cleaning with Liquid chemicals

Startup page

When the oven is switched on the default startup page is
Manual mode.

• This setting allows to set a different environment for the

starting page. Select the required environment.

Identity Card

• It shows the latest uploaded software version.

User Password

• This setting allows to set a password to access into specific

environments, features and options to prevent setting
changes.

If the password is forgotten, contact the Service.

Service

• This environment is only allowed to an authorized

technician.

OVEN CARE

WARNING

Refer to “

WARNING and Safety

Information

“.

G.1

Care information

Care operations have to be carried out by the owner and/or
user of the appliance.

IMPORTANT

Problems resulting from poor or lack of care as
hereinafter described will not be covered by the
warranty.

G.2

Appliance cleaning

Your oven is subject to soiling every time it is used for cooking:
the type of soiling and its location in the oven depend on many
factors. Hereafter, you will find information about the location

Green Spirit

Enable saving options

Skip rinse aid and

boiler descale
Skip drying phase

Time to save

SETTINGS

Cleaning

Parameter

Picture

Soun

Counter

Iiiiiiii

Agen a

Program

Multitimer program

Automatic pre et

Multitimer pre et

o nloa all

SETTINGS

Automatic

Program

Manual

Startup page

SkyHub

Plan&Save
Cleaning
Setting

Programs

MultiTimer
SkyHub

Cleaning

Green Spirit

Accessories

Identity Card

All settings

Automatic

Manual

SETTINGS

SERVICE

Service

User Password

Summary of Contents for Combi TOUCH 10 GN 1/1









































































Search results

Summary of Contents for Combi TOUCH 10 GN 1/1

Reviews:

Related manuals for Combi TOUCH 10 GN 1/1

Brands by name

Popular brands

Electrolux Professional Combi TOUCH 10 GN 1/1, User Manual

Search results

Summary of Contents for Combi TOUCH 10 GN 1/1

Reviews:

Related manuals for Combi TOUCH 10 GN 1/1

Brands by name

Popular brands