Electrolux Professional Combi TOUCH 10 GN 1/1, User Manual

Page: 32 / 72

32
To set the Dehydration cycle proceed as follows:
• Set temperature (A), time (B) and speed fan (C);
• Touch button to start the cycle;
If the cavity temperature is lower or higher then the set
temperature the oven starts a cooling or a preheating phase.
• Once the set cavity temperature is reached, load the food
into the oven.
At the end of the cycle the display shows the consumptions (if
available) as a recap message.
It is possible to save and store the performed presets; see how
to manage them at
Presets management paragraph of this
chapter.
PASTEURIZATION OF PASTA
This cycle is a special preset suitable for fresh pasta
pasteurization.
The oven works in manual mode with the only STEAM cycle
available.
To set the cycle proceed as follows:
• Set the cavity temperature (A);
• Set the core probe temperature or the time (B);
• Touch button to start the cycle;
If the cavity temperature is lower or higher then the set
temperature the oven starts a cooling or a preheating phase.
• Once the set cavity temperature is reached, load the food
into the oven and the food core probe into the product.
At the end of the cycle the display shows the consumptions (if
available) as a recap message.
It is possible to save and store the performed presets; see how
to manage them at
Presets management paragraph of this
chapter.
F.7 Programs mode
The “Programs Mode“ allows to recall program recipes already
stored or downloaded from cloud and/or create and store new
ones.
1. Select Programs mode. The display shows all stored
programs.
To change the programs displaying from a list to a grid
open the lower drawer and select grid visualization:
When displaying the programs, the oven gives you a
general information about the type of program and its
source:
Program downloaded from cloud
MultiTimer program downloaded from cloud
Program with delay start downloaded from
cloud
2. Touch the required program;
The oven loads the program in Manual mode ready to be
launched.
NOTE!
To search a programme touch icon and digit
the name on the appearing keypad. The display
will show the programs most similar to the one you
typed.
How to create and save a program
• Select a cycle in Manual mode (see F.5 Manual mode
chapter);
• If necessary modify the cooking parameters according to
your requirement;
• Open the lower drawer and touch the relevant icon to save
the programme;
Low temper.
cooking
Eco Delta
cooking
Regeneration
Proving Sous vide
Advance FSC FSC low risk
guide
FSC high risk
guide
Dehydratating Fresh pasta
pastorization
Smoker
Static combi
AUTOMATIC USER
100°C
01:30
60
°C
USER PRESET 1
1
Vent open
01:20 h:m
:10
5
A
B
C
Low temper.
cooking
Eco Delta
cooking
Regeneration
Proving Sous vide
Advance FSC FSC low risk
guide
FSC high risk
guide
Dehydratating Fresh pasta
pastorization
Smoker
Static combi
AUTOMATIC USER
100
10
25
4
°C
°C
°C
USER PRESET 1
A
B
1
01:20 h:m
01 20 :
:00
°
50%
20
%
25
°C
?
Manual Automatic Programs
Custom Cleaning Settings
Help User Agenda
Plan &
save
Cloud Program
Local Program
All programs
PROGRAMS
Pizza
Pizza (local)
Multitimer Program
Delayed Program
Cloud
delayed Programm
Cloud
MultiTimer Programm
PROGRAMS
All programs
Cloud Program
PM
6:30 100% 300°C 120°C
Visualization:
Grid List
Categories
Manage MT
Presets
Show:
Programs
All
Source:
Type:
Local Cloud
All Normal Multitimer
Selective
delete
Cloud
Program
Local
Program
Pizza
MultiTimer
Program
Delayed
Program
Cloud
delayed Program
Pizza (local)
All programs
PROGRAMS
Cloud MultiTimer
Program