Electrolux Professional Combi TOUCH 10 GN 1/1 User Manual Download Page 42

Page: 42 / 72

Select all

Show selected

3. Once you have selected a series of cooking processes:

• Touch

icon to confirm them; the list of the selected

cooking processes opens up;

• Touch

icon to start the optimization;

4. When the oven has optimized the sequence, press

button to start the execution;

The oven starts the preheating. When the last cooking is
performed an estimation of consumption reduction is
displayed.

Saving a list

• Open the lower drawer;
• Select Save list;
• Type the new name;

If the name of the new list already exists, a popup window
appears to ask for overwriting or renaming it.

Modifying a list order

• Touch the three dots of the row correspondent to the

cooking to be moved;

• Touch

to move the item;

A pop up message informs that this change cannot be
saved.

• All the remaining rows appear highlighted. Touch the row

position where you want to move the cooking.

• To recover the initial list open the lower drawer and touch

Restore list.

Deleting an item list

• Touch the three dots of the row correspondent to the

cooking to be deleted;
A pop up message informs that this change cannot be
saved.

• Touch

icon to delete the item;

To recover the initial list open the lower drawer and touch
(Restore list).

• The list cannot be optimized again. Touch

button to start

the execution;

F.13

SkyDuo/Match mode (depending on
your model - optional)

This option can be activated on demand. It works with a Wi-Fi
or Ethernet connection, installed by an authorized technician
and allows you to connect the oven and a blast chiller.

IMPORTANT

Make sure you have the SkyDuo/Match option
activated in both appliances. Only an authorized
technician can install and activate the SkyDuo/
Match option.

When the SkyDuo/Match icons

are green in both

appliances (see figure below), the connection works properly.

PLAN & SAVE

Programs

Automatic

New list

PLAN & SAVE

Preset / Program 1

New list

00:00 h:m

Preset / Program 2

00:00 h:m

Preset / Program 3

00:00 h:m

Preset / Program 4

00:00 h:m

Preset / Program 5

00:00 h:m

Preset / Program 6

00:18 h:m

Preset / Program 1

New list

00:00 h:m

Preset / Program 2

00:00 h:m

Preset / Program 3

00:00 h:m

Preset / Program 4

00:00 h:m

Preset / Program 5

00:00 h:m

Preset / Program 6

00:18 h:m

Cooking done!

Now holding!

-25%

PLAN & SAVE

Preset / Program 1

New list

00:00 h:m

Preset / Program 2

00:00 h:m

Preset / Program 3

00:00 h:m

Preset / Program 4

00:00 h:m

Preset / Program 5

00:00 h:m

Preset / Program 6

00:18 h:m

Preset / Program 1

e list

00:00 h:m

Preset / Program 2

00:00 h:m

Preset / Program 3

00:00 h:m

Preset / Program

00:00 h:m

Preset / Program

00:00 h:m

Preset / Program 6

00:00 h:m

Preset / Program 7

00:00 h:m

Preset / Program 8

00:00 h:m

6:30

300°C

100%

120°C

Save list

Calculate

P S

PLAN & SAVE

Preset / Program 1

New list

00:00 h:m

Preset / Program 2

00:00 h:m

Preset / Program 3

00:00 h:m

Preset / Program 4

00:00 h:m

Preset / Program 5

00:00 h:m

Preset / Program 6

00:00 h:m

Preset / Program

00:00 h:m

Preset / Program 8

00:00 h:m

Preset / Program 1

New list

00:00 h:m

Preset / Program 2

00:00 h:m

Preset / Program 3

00:00 h:m

Preset / Program 4

00:00 h:m

Preset / Program 5

00:00 h:m

Preset / Program 6

00:18 h:m

Plan & Save

The modification done are only

temporary and cannot be saved.

To come back to the initial list

open the drawer and press

“Restore list”.

PLAN & SAVE

Preset / Program 1

New list

00:00 h:m

Preset / Program 2

00:00 h:m

Preset / Program 3

00:00 h:m

Preset / Program 4

00:00 h:m

Preset / Program 5

00:00 h:m

Preset / Program 6

00:00 h:m

Preset / Program

00:00 h:m

Preset / Program 8

00:00 h:m

Preset / Program 1

New list

00:00 h:m

Preset / Program 2

00:00 h:m

Preset / Program 3

00:00 h:m

Preset / Program 4

00:00 h:m

Preset / Program 5

00:00 h:m

Preset / Program 6

00:18 h:m

Plan & Save

The modification done are only

temporary and cannot be saved.

To come back to the initial list

open the drawer and press

“Restore list”.

To optimize the new list return to

the previous page. do you

confirm the deletion of the

selected item?

Summary of Contents for Combi TOUCH 10 GN 1/1









































































Search results

Summary of Contents for Combi TOUCH 10 GN 1/1

Reviews:

Related manuals for Combi TOUCH 10 GN 1/1

Brands by name

Popular brands

Electrolux Professional Combi TOUCH 10 GN 1/1, User Manual

Search results

Summary of Contents for Combi TOUCH 10 GN 1/1

Reviews:

Related manuals for Combi TOUCH 10 GN 1/1

Brands by name

Popular brands