Elcontrol NanoVIP3, User Manual

Page: 3 / 68

Man. NVIP3 – Rel 1.3 EN (UK)
- 3 -
TABLE OF CONTENTS
Page
1
Presentation 5
1.1 Intended Use 5
2 Safety 7
2.1 Operators' Safety 7
2.2 EC, RoHS & WEEE Declaration of Conformity 7
2.3 Reference Standards 8
2.4 Warranty Conditions 9
3 Description & Connection to the Electrical System 10
3.1 Power Supply 10
3.2 USB Port 11
3.3 Memory Card (uSD) 11
3.4 Electrical Connection Schemes 12
4 Start Up 15
4.1 User Interface 15
4.1.1 Description of Setup & Measurement Menus 15
4.1.1.1 Bottom Bar 16
4.1.2 Keypad 16
4.2 Programming & Setup 17
4.2.1 Connections Setup 19
4.2.1.1 Type of Electrical Connection Setup 19
4.2.1.2 Type of Voltage & Voltage Ratio (VT) Setup for L1, L2, L3 19
4.2.1.3 Type of Voltage & Voltage Ratio (VT) Setup for U Aux 19
4.2.1.4 Cogeneration Setup 19
4.2.1.5 Zero Adjustment 19
4.2.1.6 Connection Check 19
4.2.2 Current Probes Setup 20
4.2.3 Setup of Minimum, Maximum & Average Values 20
4.2.3.1 Integration Time Setup 20
4.2.3.2 Reset of Average Values & Maximum Demand 20
4.2.3.3 Reset of Minimum & Maximum Values 21
4.2.4 Counters Reset 21
4.2.5 Language Setup 21
4.2.6 LCD Setup 21
4.2.6.1 Display Backlight Setup 21
4.2.6.2 Display Orientation Setup 22
4.2.6.3 Display Contrast & Brightness Setup 22
4.2.6.4 Menu Type Setup 22
4.2.7 Clock Setup 22
4.2.8 Bottom Bar Setup 22
4.2.9 Tariff Setup 23
4.2.9.1 Configuration & Resetting of Tariff 23
4.2.9.1.1 Selection of Days 23
4.2.10 EN 50160 Setup & Reset 24
4.2.11 Serial Communication Setup 24
4.2.11.1 Serial Communication Test 24
4.2.12 Alarm Setup & Reset 25
4.2.12.1 Alarm Configuration 25
5 Instrument Use & Consultation 26
5.1 Scrolling through Measurement Menus 26
5.2 Three-phase or Two-phase Connection Menus 32
5.2.1 Voltages Menu 32
5.2.2 Currents Menu 33
5.2.3 Power Menu 34
5.2.4 Counters Menu 36
5.2.5 Harmonics Menu 38
5.2.5.1 Consulting Harmonic Histograms 40
5.2.6 Waveforms Menu 41