Man. NVIP3 – Rel 1.3 EN (UK)
- 15 -
4 - START-UP
Before using NanoVIP
3
the correct configuration must be done, depending on the type of
installation and system to which it will be connected. Make sure the electrical cabinet is off before
connecting the instrument. Once the connection is complete, switch on the electrical cabinet and
the instrument by pressing and holding down the
POWER
key for approximately 3 seconds (the
same action switches off the instrument).
At start-up, the following screen will be displayed for a few seconds:
●
product model;
●
software version;
●
serial number.
4.1 - User Interface
For easy use, NanoVIP
3
is equipped with a graphic LCD and a membrane keypad with snap domes for tactile
feedback, described in detail in Sect. 4.1.2.
The software architecture of the instrument is divided into MENUS, more specifically SETUP and MEASUREMENT
Menus. Each menu consists of a number of pages, which are described in the following section.
4.1.1 - Description of Setup & Measurement Menus
A typical
SETUP
Menu consists of:
●
a heading showing the name/title of the screen;
●
an area with the fields to be selected - and possibly modified - by
means of the
cursor
.
A typical
MEASUREMENT
Menu consists of:
●
a heading showing the name/title of the screen;
●
an area displaying related parameters (See NOTE);
●
an area displaying the main parameters;
●
a bottom bar displaying alternating information (See Sect. 4.1.1.1)
