Man. NVIP3 – Rel 1.3 EN (UK)
- 46 -
5.2.10.2.5 - Manual Start
If manual start is selected, the instrument will detect any current (without the threshold set acting as a trigger)
occurring during the time period selected. At the end of the selected time period, the waveform detected will be
displayed (Sect. 5.2.10.3).
5.2.10.3 - Inrush Current Display
When an inrush current is detected, the following information will be displayed:
-
Waveform;
-
Maximum value;
-
RMS value;
-
Duration.
This screen will be displayed until the user:
-
Exits (Exit = Return to the Setup page, Sect. 5.2.9.2).
-
Repeats the measurement using the same settings (Repeat).
-
Stores the measurement on the uSD card (Store, Sect. 5.2.10).
5.2.11 - Measurement Campaigns Menu
This menu allows the user to:
•
Set a Measurement Campaign (Sect. 5.2.11.1).
•
View the data stored on the uSD card (Sect. 5.2.11.2).
5.2.11.1 - Measurement Campaigns
Select "Start Campaign" to view the Measurement Campaign configuration page.
The following parameters can be set:
•
Campaign Name (Sect. 5.2.11.1.1).
•
Storing Rate (Sect. 5.2.11.1.2).
•
Manual Start (Sect. 5.2.11.1.3).
•
Scheduled Start (Sect. 5.2.11.1.4).
5.2.11.1.1 - Campaign Name
To assign a name to the campaign, place the cursor on the first character, press
and change the character
using the
and
keys.
The selection of the other characters has been made easier: move the flashing cursor using the and
⊳
keys,
and change the character as described above. The campaign name must have 6 alphanumeric characters (if the
same name is assigned to more than one campaign, progressive numbers will automatically be added to
subsequent campaign names, e.g. Survey01).
x3”
