Man. NVIP3 – Rel 1.3 EN (UK)
- 11 -
3.2 - USB Port
NanoVIP
3
can be connected to a PC through the USB port and the cable supplied. This connection allows the
user to download the MODBUS measurement registers using the PC Energy Studio Manager software.
The USB communication may also allow easy upgrade of the firmware (internal software) of the instrument.
NOTE
: If the PC does not automatically detects NanoVIP
3
as a device, download or update the appropriate
drivers at
www.ftdichip.com/Drivers/VCP.htm
3.3 - Memory Card
NanoVIP
3
is equipped with a slot for a 2 GB uSD memory card, which can be used to store measurement
campaigns data (Sect. 5.2.11.2), fast transients (Sect. 5.2.10.1) and inrush currents (Sect. 5.2.10.2).
The memory card must be inserted as shown in the figure
on the left, with the contacts facing up.
NOTES:
The slot is push-push type (the card is both
inserted and removed by pressing it). Do not try to remove
the card by pulling it, as this will damage the connector.
Do not remove the uSD card whilst a measurement
campaign is being performed, as all data will be lost.
The uSD card is supplied with the instrument, together with the:
•
User Manual
•
PC software (See software manual for use)
uSD Card SLOT
