23
Sixth page
Seventh page
This page is present only when LOG is OFF
NOTE : changing the LOG type clears the on-board memory.
Eighth page
This page is present only when LOG is OFF
Ninth page
This page is present only when LOG is OFF
Tenth page
thd
Fnd 60 Hz
thd
Fnd 50 Hz
thd
OFF
thd
60 Hz
thd
50 Hz
SAMPLE
LOG
Std
LOG
m
LOG 01
rate
LOG
YES
CLEAR
LOG no
CLEAR
k
COM 9,60
n 71
Use the SET key to select a 50 Hz or a 60 Hz fundamental frequency
OFF = no harmonic measurements and printouts
Fnd = thd referred to the fundamental instead of rms value
Factory default : OFF
Use the SET key to change the LOG type and confirm using PAGE
key : the display will blink for 5-10 seconds.
Standard LOG = rms values are stored
Sample LOG = V, I waveforms samples are stored
Factory default : Std
Use SEL and SET keys to select from 1 to 99 minutes of data
recording rate. 00 = 3 seconds
Factory default : 1 minute
Use the SET key to select NO/YES; press the PAGE key to clear
internal memory : the display will blink for 5-10 seconds
Factory default : NO
Use SEL and SET keys to select baud rate (1200, 2400, 4800, 9600,
19200 or 38400 baud), data bits (7/8), stop bits (1/2), parity
(no/even/odd)
Factory default : 9600, 7, 1, n
