33
Press the PRG button to enter Printing Interval selection page.
A "P" and two zeros are displayed initially. These represent the tens and units of the printing interval.
Simply set the number of minutes you require for the interval between one printout and the next.
Press the SELC button to switch between the tens and the units. The digit currently programmable flashes.
Press the SETC button repeatedly to set the value you require for each digit. Once you have set the require value, press
the PRG button again to enter clock set up page.
To disable automatic timed printouts, set the print interval to 00.
•
CLOCK SET UP:
The initial display shows two zeroes. This is for the YEAR value.
Use the SELC button to select the tens and units and press the SETC button to set the required value, and set the current
YEAR value
When a new year is set, the month and day values are automatically reset to 1.
Press the PRG button to move on the next display in which you can set DAY and MONTH.
Use the SELC button to select the month or day value, and the SETC button to set the correct date.
If you set a new month, the day value is automatically reset to 1.
The calendar clock performs a check on the values input to check for incongruities.
Press the PRG button to move on the next setup page in which you can set the HOUR and MINUTES.
Proceed as before to set the hour and minutes. On completion of the clock setup, press the PRG button again to return
normal clock mode.
PRG SELC SETC
0 1 0 1
PRG SELC SETC
y
0 0
PRG SELC SETC
P 4 1
Press PRG button twice
PRG SELC SETC
P 0 0
