18
5.2
THREE PHASE MODE
The instrument display and data control functions are controlled by the keys on the front panel. The following keys
control the display of measurements:
5.2.1
THE PAGE KEY
The PAGE key allows you to display each of 12 measurement pages.
When you switch on the instrument on in three phase mode, the first measurement page is displayed by default.
Press the PAGE key repeatedly to move on the other pages.
First page (three-phase)
Volt: Rms phase to phase voltage of three phase system (average of the three-phase system).
Amp.: Rms current equivalent to a symmetrical and balanced three phase system .
P.F. Cosø : Power factor of the three phase system.
kWatt : Active power of the three-phase system.
ELCONTROL energy
MICROVIP3 Plus
3-PHASE ENERGY & HARMONIC ANALYZER
PAGE
PRG SELC SETC
PAPER
SEL
SET
A
V
Cosø
P.F.
kW
3 ø
Second page ( three-phase)
Volt L1: Rms voltage between phase L1 and neutral (STAR)
Rms voltage between L1 and L3 (DELTA)
Volt L2: Rms voltage between phase L2 and neutral (STAR)
Rms voltage between L2 and L3 (DELTA)
Volt L3: Rms voltage between phase L3 and neutral(STAR)
Rms voltage between L1 and L2 (DELTA)
ELCONTROL energy
MICROVIP3 Plus
3-PHASE ENERGY & HARMONIC ANALYZER
PAGE
PRG SELC SETC
PAPER
SEL
SET
L2
V
L1
L3
Third page (three-phase)
Amp L1: Rms Current of Phase1.
Amp L2 : Rms Current of Phase2.
Amp L3 : Rms Current of Phase3.
ELCONTROL energy
MICROVIP3 Plus
3-PHASE ENERGY & HARMONIC ANALYZER
PAGE
PRG SELC SETC
PAPER
SEL
SET
L2 A
L1
L3
