15
5
MICROVIP3 PLUS OPERATING MODES
The MICROVIP3 PLUS displays measurements on its LCD.
A switch on the rear panel allows you to select one of two operating modes.
5.1
SINGLE PHASE MODE
The instrument display and data control functions are controlled by the keys on the front panel shown in fig. 2.1.
5.1.1
THE PAGE KEY
The PAGE key enables you to switch the display between seven measurement pages.
When you switch the instrument on in single phase mode, the first measurement page is displayed by default. Press the
PAGE key to move on to the next pages.
First page (single-phase)
Volt: Rms phase-to-neutral voltage
Amp: Rms current
Watt: Active power with full scale value of VxA.
Cos
Φ
P.F.: Power Factor with variations from -0,00 a +0,00.
Press page key to display
next pages
ELCONTROL energy
MICROVIP3 Plus
3-PHASE ENERGY & HARMONIC
ANALYZER
PAGE
PRG SELC SETC
PAPER
A
KW
Cos
Φ
P.F.
V
SEL
SET
Second page (single-phase)
kVAr: Reactive power.
kVA: Apparent power.
Hertz: voltage Frequency, range 20 to 600 Hz (AC) and 00 Hz (DC).
ELCONTROL energy
MICROVIP3 Plus
3-PHASE ENERGY & HARMONIC ANALYZER
PAGE
SEL
PRG SELC SETC
PAPER
KVA
Hz
VAr
SET
Third page (single-phase)
kvarh (kVAh) : Reactive energy consumption for the single-phase system
(Apparent energy with STD2 option)
kWh : Active energy consumption for the single-phase system
ELCONTROL energy
MICROVIP3 Plus
3-PHASE ENERGY & HARMONICS ANALYZER
PAGE
PRG SEL SET
PAPER
KW h
kVArh
SEL
SET
