ELCOM Euro-100T, User Manual

Page: 64 / 84

64
Reports
HOW TO PRINT OUT REPORTS
There are two modes for printing reports: “X” mode and “Z” mode.
Use “X” mode reports if it is necessary to obtain sales information since the last resetting. It is used to ge-
nerate reports during the day, between two shifts, etc. The reading may be made in any numbers, it does
not affect the cash register memory.
Use “Z” mode reports when you need to print reports and to clear the register’s memory. “Z” report is usu-
ally carried out once a day after finalising the daily sales.
GENERATED REPORTS
Table 5. 1. Generated reports.
Report “X” mode “Z” mode
Department •
PLU • •
Cashier •
Financial •
Total (daily) • •
Periodical • •
Hours daily • •
Hours periodical (monthly) • •
In the “Z” mode the department report, the cashiers report and the financial report are carried out within
the total “Z” report.
REPORTS CONTENTS
Department report
When printing a full department report, only departments with non-zero sales are printed.
Report contains:
1) Name of the department
2) Number of items sold in the department
3) Total value of the items sold in department
4) Total value of sales including all departments
In the “Z” mode it is possible to print the department report only within the total “Z” report. See chapter
regarding total daily “Z” report.
PLU report
Three different types of PLU reports can be printed: the individual PLU report, report of PLU range, and the
full PLU report. Each of these types can contain the PLU number (depends on the report mode).
When printing a PLU report, only PLUs with non-zero sales are printed.
A PLU report contains:
1) Number of the PLU (selective according to the mode of report function calling).
2) The name of the PLU.
3) Number of sold PLUs.
4) Financial value of sold PLUs.
The full PLU report prints also the total financial value of sales from the last reset. PLUs that were not acti-
vated are not printed.