ELCOM Euro-100T, User Manual

Page: 27 / 84

27
Programming manual
3 0 The terminalcode for the bar code scanner
0 – terminal CR and LF
1 – terminal CR
2 – terminal LF
4 0 1st Scale port number
0 – device is not used
3 - COM3, 4 - COM4
5 0 Communication protocol for 1st electronic scale
0 - CAS Morcan, MARTES T
1 - Euro scales, MARTES M
2 - Macca K
3 - Dibal
4 - Motex R
6 - Mettler Toledo
6 0 2nd Scale port number
0 - device is not used
3 - COM3, 4 - COM4
7 0 Communication protocol for 2nd electronic scale
Same as „Communication protocol for 1st
electronic scale
Two and more devices can´t be assigned in F5a) and F5b) to the same serial port.
Flag 5 c) - External RS-485 converter settings
Figure 3.5. c) Fifth c) system flag values.
Digit Default setting Meaning Valid values
1 0 External RS-485 converter using 0 - no, 1 - yes
2 1 Active level of signal for RS-485 converter control 0, 1
3-6 0000
Time in tenths of µs [µs x 10], which ECR has to
wait before packet sending
0 - 2 000 i.e. 0 - 20 000 [µs]
Flag 6 - Printing mode settings
Figure 3.6. Sixth system flag values.
Digit Default setting Meaning Valid values
1 0
Printing modes without external power
supply
0 – normal mode,
1, 2 - not used
2 0 Printing modes with external power supply 0 – normal mode,
1, 2 - not used
3 1 Graphical logo printing
0 – no,
1 – yes
4 0 Font size
0 – normal font: character height approx. 2.5 mm,
1 – not used
5 1 Standby mode
0 – standby inactive,
1 – standby after 1 min.,
2 – standby after 5 min.,
3 – standby after 10 min.,
4 – standby after 15 min.
Flag 7 - Limit and value of the percent add-on
You can shift from limit to value programming by pressing the

(S
UBTOTAL
) button.
Figure 3.7. Seventh system flag values.
Digit Default setting Meaning Valid values
1 - 2 Left 00 Limit for the percent add-on entered during sale 00–99
3 - 6 Right 0000 Programmed percent add-on value (to program 10% add-on enter 1 0 0 0) 0000–9999