ELCOM Euro-100T, User Manual

Page: 35 / 84

35
Programming manual
7) Enter the department name. If you mistype, you can correct your mistakes by pressing

(C
LEAR
).
See the end of chapter for more detailed instructions on entering texts.
8) Press the

(S
UBTOTAL
) to continue department programming for next department; proceed to
step 3). The programming of departments can be finished at any time by pressing

(T
OTAL
) key.
Departments correcting
1) Switch the ECR to the “P” mode by pressing

.
2) Enter the number of the department you want to adjust (1–10) and press
h
(DPT) key, or press
the selected department button to directly choose required department.
3) Continue re-programming desired values as shown in the section above.
4) You can print out all the programmed department values by pressing
 (C
HECK
) key; to print out
the currently programmed department, press  (EAN) key.
5) Finish the corrections by pressing

(T
OTAL
) key.
Department values print out
Check the programmed department values by pressing the

(C
HECK
) key in the department program-
ming mode. In the programming mode, press the direct button of a department or a department number
and then press the
h
(DPT) button. Afterwards press the

(C
HECK
) button. To print the settings of
currently programmed department, press the

(EAN) key.
SALE UNITS PROGRAMMING
Sale unit can be assigned to each PLU and represents the unit in which the PLU is sold. It is possible to
program eight sales units with up to three characters each. Figure 3.17 shows the default settings for sale
units; you can adjust these defaults to your needs.
Sale units programming procedure:
1) Switch the ECR to the “P” mode by pressing

.
2) Press the

(S
URCHARGE
) key. The ECR display shows the current sale unit number along with
the label (“
UNIT
”) and then programmed unit is shown.
3) Enter the text for the current sale unit (up to three characters). You can correct mistypes by pressing

(C
LEAR
) key. See the section on entering texts at the end of this chapter.
Figure 3.17. Default sale units.
Digit Units Digit Units
1 5 m
2 PCS 6 m 2
3 kg 7 btl
4 l 8 pkg
4) Press

(S
UBTOTAL
) key to continue sale units programming with the next sale unit. Finish sales unit
programming at any time by pressing the

(T
OTAL
) key.

.

 