ELCOM Euro-100T, User Manual

Page: 26 / 84

26
Programming manual
Flag 3 - Receipt consecutive number, cash register number
Figure 3.3. Third system flag values
Digit Default setting Meaning Valid values
1 0 Receipt consecutive number clearing
0 – after “Z” total (daily) report,
1 – after “Z” periodical report
2 – 3 01 Cash register number (01 – 99)
4 – 7 0001 Receipt consecutive number (01 – 9 999)
Flag 4 - Required operations
Figure 3.4. Fourth system flag values.
Digit Default setting Meaning Valid values
1 1 Subtotal amount print out after Subtotal key is pressed 0 – no, 1 – yes
2 0 Required Subtotal key pressed before receipt is finished
0 – not required,
1 – required
3 0 Required Credit Card number entering if paid by Credit
0 – not required,
1 – required
4 0 Required customer’s payment amount entering
0 – not required,
1 – required
Flag 5 a) - Communication with PC and payment terminal
Figure 3.5. a) Fifth a) system flag values.
Digit Default setting Meaning Valid values
1 5 PC port number
0 – device is not used
3 - COM3
4 - COM4
5 - USB port
2 1
Programming of communication speed for the PC.
Parity: none, DataBits: 8, StopBits: 1 0 – 9 600 Bd
1 – 38 400 Bd
3 0 Data transmission direction in PC-ON LINE mode
0 – PC transmits
1 – PC transmits and receives
4 0 not used
5 0 not used
Two and more devices can´t be assigned in F5a) and F5b) to the same serial port.
Flag 5 b) - Scanner and scales configuration
Figure 3.5. b) Fifth b) system flag values.
Digit Default setting Meaning Valid values
1 0 Scanner port number
0 – device is not used
3 - COM3, 4 - COM4
2 3 Bar code scanner communication speed
0 – 1 200 Bd
1 – 2 400 Bd
2 - 4 800 Bd
3 - 9 600Bd
4 - 19 200Bd