ELCOM Euro-100T, User Manual

Page: 34 / 84

34
Programming manual
Programming procedure:
1) Switch the ECR to the “P” mode by pressing

.
2) Press the

(DPT) key. The current department number and the label (“
DPT฀PR
”) appear at the
display to indicate department price programming. Then programmed price appears at the display.
3) Enter the new department price (maximum eight digits, including decimals). If you mistype, you can
correct your mistakes by pressing

(C
LEAR
) key.
4) Press the

(S
UBTOTAL
) key to continue with programming the flag for the current department. The
display shows current department number together with label (“ DPT฀FLAG ”) to indicate depart-
ment flag programming. Then value of department’s flag is shown at the first display row. Press

(T
OTAL
) key to stop department programming (next steps will not run).
5) Enter the department flag for the current department according to the Figure 3.16. If you mistype,
you can correct it using the

(C
LEAR
) key.
Figure 3.16. Department flag values
Digit Default setting Meaning Valid values
1 0 Assigning VAT level to a department
0 – no tax ,
1 – tax level 1,
2 – tax level 2,
3 – tax level 3,
4 – tax level 4,
5 – tax level 5,
6 – tax level 6
2 0 Type of department
0 – normal,
1 – single item department
3 0 Negative department
0 – no,
1 – yes
4 3 Sale feature
0 – sale forbidden,
1 – open price (manually entered price),
2 – fixed price (preprogrammed price),
3 – 1+2 (preprogrammed price or the possibi-
lity to enter a price manually)
5 8
HALO limit, maximum 8 (maximum number of
digits allowed)
1-8
Note: It is possible to assign DPT only to the programmed VAT level.
6) Press

(S
UBTOTAL
) key to continue with programming the name for the current department. The
ECR display shows current department number along with the label (“
DPT฀NAME
”). Then cur-
rent department name is shown.

.
 


.
 

.


