ELCOM Euro-100T, User Manual

Page: 39 / 84

39
Programming manual
2) Enter the PLU number and press the

(P
RICE
) button. If you don’t enter any number, the ECR will
start form PLU no. 1. The PLU number and the label (“
PLU฀P
”) appear at the display, then current
PLU price is displayed.
3) Enter the new price (maximum eight digits including decimals).
4) Press
 (S
UBTOTAL
) key to continue in the price programming of the next PLU; proceed to step 3).
5) Press

(T
OTAL
) key to finish the quick PLU price programming.
Correction of programmed PLUs
1) Switch the ECR to the “P” mode by pressing

.
2) Enter the PLU number and press the

(PLU) button. You can also use the bar-code scanner:
scanning the bar-code will jump to the said PLU.
3) Continue programming the PLU values as described in the relevant section.
4) You can print out all programmed PLUs by pressing

(C
HECK
) key or you could print out the cur-
rently programmed PLU by pressing

(EAN) key.
5) You can jump to any PLU using the procedure in step 2). Press

(T
OTAL
) key to finish correcting
the PLUs.
Programmed PLUs print out
To verify programmed values, print them by pressing the

(C
HECK
) key in the PLU programming mode. If
the cash register is in root programming mode, press the

(PLU) key and then the

(C
HECK
) key. Only
PLUs that have been programmed will be printed. It is possible to print the programmed value of a particular
PLU by pressing

(EAN) key.
PROGRAMMING THE EURO CURRENCY
The Euro-100T allows you to use the Euro currency. Depends on the phase of the Euro currency implemen-
tation, it is also possible to register in the national currency (phase no. 1 and no. 2) or in a foreign currency
(phase no. 3). Registration with the Euro is divided into four phases.
Phase without Euro currency
The cash register works without the Euro. All transactions are performed in the national currency.
First Euro currency phase
In the first Euro phase the main currency is the national one, the secondary currency is the Euro. The custo-
mer can pay either in the national currency or with Euro. Going back to the phase without Euro isn’t possible
without resetting of the ECR. Call your service technician in that case.

.


