ELCOM Euro-100T, User Manual

Page: 31 / 84

31
Programming manual
Printing the programmed logo lines
Programmed logo lines can be printed in text logo programming mode by pressing the

(Check) key.
Print a particular programmed line by pressing the

(EAN) key.
RECEIPT GRAPHIC LOGO PROGRAMMING
In the ECR is preprogrammed graphic logo by its producer. You can reprogram it using communication
software (Euro2A, ECR.dll, Com2A.exe, Com32.dll), available at producer‘s web site (www.elcom.eu).
Graphical logo parameters:
format bmp, 1 bit (black and white)
resolution 160x180 pixels
CASHIERS PROGRAMMING
The programming of cashiers consists of three steps:
• cashier’s name
• cashier’s password
• cashier’s access rights
The ECR allows you to program up to six cashiers. This programming allows you to assign a password to
each cashier, which will be used by him/her to log into the ECR and use its functions. This password will
also identify the cashier working on the ECR: the receipts issued by that cashier are identified by his/her
name and all operations are assigned to him/her.
Programming procedure:
1) Switch the ECR to the “P” mode by pressing

.
2) Press the

(P
ASSWORD
) key. Display will show the current cashier number and label
(“
CASH.฀NAME
”) which indicates that you are programming the cashier’s name. Then display
contains the current cashier’s programmed name.
3) Enter the name for the current cashier. Cashier name can have up to ten characters. If you mistype
or make a mistake while entering text, you can use the

(C
LEAR
) key to delete recent characters.
See the end of the chapter for hints on entering texts.
4) Finish the cashier name programming by pressing

(S
UBTOTAL
) key. The ECR shows the current ca-
shier number, together with the label (“
CASH.฀ PSWD
”) that indicates programming of cashier’s
password. Press

(T
OTAL
) to finish the programming procedure (next steps will not run).
5) Enter the cashier’s password. The password is composed by the up to four numerals. If you mistype
during entering of the password, you can use

(C
LEAR
) key to correct your mistakes.

.


.



.


.

